Guide for UltFone Toolkit - iOS System Repair

1-Click to Enter Recovery Mode

Need to put your iPhone/iPad/iPod in recovery mode but have no idea about how to implement it? Can't enter/exit recovery mode because the Home or Power button in your iDevice is broken? Here UltFone iOS System Repair comes to empower you to enter or exit iOS recovery mode by only one click with no need to press any buttons.

iPhone/iPad/iPod recovery mode, which presents a Connect to iTunes message on the screen, is a situtaion that can happen during/after an iOS update/jailbreak. Let's see how to put an iDevice in recovery mode with iOS System Repair free.

Step 1: Upon downloading and installing iOS System Repair on your PC/Mac, please launch the program and connect your iPhone/iPad/iPod touch to computer with a lightning cable.

Select Enter Recovery Mode option from the main interface.

Step 2: Click on the Enter button to put your iPhone, iPad or iPod touch in recovery mode. After a 10-sec wait, you will see your device display the classic USB to iTunes logo. Congratulations! Your device has entered the recovery mode successfully.

Video Guide on How to Put iPhone In Recovery Mode Free

1-Click to Exit Recovery Mode

iPhone gets stuck in recovery mode after updating to a new firmware or when you are trying to restore a backup? UltFone iOS System Repair allows you to fix iPhone/iPad/iPod touch stuck in recovery mode with only 1-click.

Step 1: Connect your iPhone/iPad/iPod touch to computer, and launch iOS System Repair. Select the Exit Recovery Mode feature from the main interface.

Step 2: Click on the Exit button and wait for 10 seconds or so.

Step 3: After a while, your iPhone/iPad/iPod will reboot and get out of recovery mode successfully.

Video Guide to Fix iPhone Stuck in Recovery Mode

Factory Reset iPhone/iPad/iPod without Password

Your iPhone is diabled and cannot turn on anymore? Or you want to restore iPhone but iTunes failed to do that? No worries, with the "Factory Reset" function on UltFone iOS System Repair, you can directly reset iPhone to factory settings without using iTunes or iCloud. Here's how to do it:

Step 1: Run the program and choose "Reset Device" option at the bottem right of the main interface.

Step 2: Then you'll see a new screen, Select "Factory Reset" and click on the "Factory Reset" button to enter the firmware download page.

Step 3: Now you'll need to download the matched firmware package for you before resetting. You are also allowed to import the firmware package manually.

Step 4: Once the firmware package is downloaded, you can start resetting your device. When the process completes, set up your iPhone as new.

General Reset iPhone/iPada/iPod

General Reset feature will help you return iPhone/iPad/iPod settings to their defaults and resolve some minor glitches, like network not working, notification not working etc.

Step 1: Select "General Reset" and click on the "General Reset" button to enter the firmware download page.

Step 2: Follow the on-screen instructions to reset your device according to your needs.

Part 4: Downgrade iOS/iPadOS

UltFone iOS System Repair provides downgrading iOS system mode, while it will erase all data on your device. Thus, it’s important to back up data before using downgrade features.

This guide mainly introduce how to downgrade from iOS 17 with Downgrade mode. You need to download and install UltFone iOS System Repair on your computer first, then follow the steps below.

Step 1. Connect iPhone to Computer

Run UltFone iOS System Repair on your computer and connect iPhone to computer. Once the device is connected, click “iOS Upgrade/Downgrade” at the bottom left of the panel.

Step 2. Choose Downgrading System Option

Since it is a ios version, you should choose Downgrading System mode. Then, click the button below.

• Downgrading System supports to downgrade between the major version, including iOS downgrade. For example, downgrade iOS 16 to iOS 15.5.

Step 3. Download Firmware Package

UltFone iOS System Repair will detect your iOS version automatically and display the downgradable iOS firmware. Click “Download” to get the package.

• · If you failed to download the firmware, just hit the ‘click here’ to download it through browser.
• · If you've already have a firmware on computer, just click "import local file" to import the firmware manually.

It may take a few minutes to download the firmware.

Note:

• Unsigned IPSWs cannot currently be restored via UltFone iOS System Repair. If the iOS version is not supported to downgrade, the program will prompt that no downgradable iOS firmware found.

You can visit the IPSW website to check which firmware Apple is signing.

Step 4. Initiating Downgrade

Once the firmware package is downloaded on your computer, you can click 'Initiating Downgrade' to downgrade iOS/iPadOS.

iOS Downgrade will cause all data and settings loss, please make sure that you have made a backup before. If confirmed, then click “Continue” button.

Step 5. Downgrading

The program starts to downgrade iOS/iPadOS, please do not disconnect your device during the downgrade process.

When the downgrade is completed, you will see the completed page and your iPhone/iPad will go back to the previous version.

Part 5: Fix macOS system

Standard Repair: Fix macOS Stuck Issues without Data Loss

Step 1: Download and Install UltFone iOS System Repair on Normal Mac

Run UltFone iOS System Repair on your normal mac computer and connect it to the computer that needs to be repaired. Once the device is recognized, click 'Repair macOS system issues' button to use macOS System Recovery tool.

• Note:
• To repair macOS system successfully, it's highly recommended that you connect the the two macOS device using the Apple original lightning USB cable.

Step 2: Click 'Standard Repair' to Proceed

In the below interface, select 'Standard Repair' and read the note below to avoid repairing process failure. If you're ready, click 'Standard Repair'.

Step 3: Enter into DFU Mode

Select the model of the mac computer you need to be repaired and follow the instructions on the screen.

• Note:
• If your device can't be detected, please make sure that the model you have selected corresponds to your device model, and follow the instructions to put your computer into DFU mode.

Step 4: Download Firmware Package

If you're ready, click 'Download' to download the latest firmware package. It will take some time due to about 12GB firmware package.

If you failed to download the firmware package, you can download it through browser by hit 'click here'.

If you've already downloaded the firmware package on computer, just click "import local file" to import the firmware manually.

Step 5: Start Standard Repair

Once the firmware package is downloaded on your computer, you can click 'Start Standard Repair' to start system recovery.

The whole repair process will take a few minutes, please wait patiently.

After the repair is done, your macOS device will automatically reboot and all your data will not be erased.

Note:

• If your Mac models is with the Apple T2, before repairing done, you should follow the instructions below steb by step:

• After you finished all the steps, please click the "Done" button and your Mac with Apple T2 will be repaired successfully without data loss.

Deep Repair: Fix macOS System Issues with a Higher Success Rate

Deep Repair can fix more serious macOS system issues with a higher success rate but it will cause data loss. So when Standard Repair fails repair, you can take Deep Repair for a try.

Step 1: Download and Install UltFone iOS System Repair

Download and run UltFone iOS System Repair, connect your two Mac devices via a USB cable.

Step 2: Click "Deep Repair"

In the following interface, select "Deep Repair" and read the note below carefully. If there"s no problem, please click "Deep Repair".

Step 3: Enter into DFU Mode

Select the model of the mac computer you need to be repaired and follow the instructions on the screen.

• Note:
• If your device can"t be detected, please make sure that the model you have selected corresponds to your device model, and follow the instructions to put your computer into DFU mode.

Step 4: Download Firmware Package

Now, you can start downloading firmware package by pressing "Download" button and it will take a few minutes.

Step 5: Start Deep Repair

Now, the firmware package has been downloaded, click "Start Deep Repair" to start repairing.

Deep Repair will cause all data and settings loss. If the device can operate, you can back up data first and then try again. If not, just click "Repair" to proceed.

After a while, your device will be repaired successfully, just to check if your device goes back to normal.

• Note:
• If your Mac models is with the Apple T2, before repairing done, you should follow the instructions below steb by step:

• After you finished all the steps, please click the Done button and your Mac with Apple T2 will be repaired successfully.

Part 6: Downgrade macOS

If you want to revert your Mac to a previous version due to compatibility issues, UltFone iOS System Repair is the best bet for you. It provides a hassle-free solution that saves time and effort. With just a few clicks, you can downgrade your macOS version, and UltFone iOS System Repair will handle the rest.

This guide mainly introduce how to downgrade your Mac devices. You need to download and install the UltFone iOS System Repair on your computer first, then follow the steps below.

Step 1. Connect Both Mac Devices

Run UltFone iOS System Repair on your computer and connect both Mac devices. Once the devices are connected, click “More Features” at the bottom left of the panel.

Step 2. Choose Downgrading System Option

No matter beta version or final version, you should choose Downgrading System mode. Then, click the button below.

Step 3. Enter into DFU Mode

Follow the instructions below to put your mac into DFU mode. The methods are different from models, please make sure you choose the right model.

Step 4. Download Firmware Package

UltFone iOS System Repair will detect your macOS version automatically and display the downgradable macOS firmware. Click “Download” to get the package.

· If you failed to download the firmware, just hit the ‘click here’ to download it through browser.

· If you've already have a firmware on computer, just click import local file to import the firmware manually.

It may take a few minutes to download the firmware.

• Note:
• Unsigned IPSWs cannot currently be restored via UltFone iOS System Repair. If the macOS version is not supported to downgrade, the program will prompt that no downgradable macOS firmware found.

Step 5. Initiating Downgrade

Once the firmware package is downloaded on your computer, you can click 'Initiating Downgrade' to downgrade macOS.

Initiating Downgrade will cause all data and settings loss, please make sure that you have made a backup before. If confirmed, then click “Continue” button.

Step 6. Downgrading

The program starts to downgrade macOS, please do not disconnect your device during the downgrade process.

When the downgrade is completed, you will see the completed page and your two mac devices will go back to the previous version.

Part 7: Upgrade macOS

Whether you want to update to the latest macOS version or revert to a previous version due to compatibility issues, UltFone iOS System Repair provides a hassle-free solution that saves time and effort. With just a few clicks, you can upgrade your macOS version, and UltFone iOS System Repair will handle the rest.

This guide mainly introduce how to update your Mac devices. You need to download and install the UltFone iOS System Repair on your computer first, then follow the steps below.

With UltFone iOS System Repair, you can be sure that your Mac will be updated to the latest version with ease and without any risk of data loss or damage to your system. Here is how to update your macOS Update macOS without a hitch.

Step 1. Connect Both Mac Devices

Run UltFone iOS System Repair on your computer and connect both mac devices. Once the devices are connected, click “More Features” at the bottom left of the panel.

Step 2. Choose Upgrading System Option

No matter beta version or final version, you should choose "Upgrading System" mode. Then, click the button below.

Step 3. Enter into DFU Mode

Follow the instructions below to put your mac into DFU mode. The methods are different from models, please make sure you choose the right model.

Step 4. Download Firmware Package

UltFone iOS System Repair will detect your macOS version automatically and display the upgradable macOS firmware. Click “Download” to get the package.

· If you failed to download the firmware, just hit the ‘click here’ to download it through browser.

· If you've already have a firmware on computer, just click "import local file" to import the firmware manually.

It may take a few minutes to download the firmware.

• Note:
• Unsigned IPSWs cannot currently be restored via UltFone iOS System Repair. If the macOS version is not supported to upgrade, the program will prompt that no upgradable macOS firmware found.

Step 5. Initiating Upgrade

Once the firmware package is downloaded on your computer, you can click 'Initiating Upgrade' to update macOS.

Initiating Upgrade will not clear your data. If confirmed, then click “Continue” button.

Step 6. Upgrading

The program starts to update macOS, please do not disconnect your device during the upgrade process.

When the upgrade is completed, you will see the completed page and your Mac devices will be the newest version.

• Note:
• If your Mac models is with the Apple T2, before repairing done, you should follow the instructions below steb by step:

• After you finished all the steps, please click the "Done" button and your Mac with Apple T2 will be upgraded successfully.