How to Use UltFone Toolkit - iOS Screen Unlock

Part 1. Unlock iPhone Passcode

Step 1: Download and Install UltFone iOS Screen Unlock

Download and install UltFone iOS Screen Unlock on your PC or Mac, launch the program and click "Start" to begin unlocking lock screen passcode.

Step 2: Connect iPhone to Computer

Connect your iPhone to your computer and the software will detect it automatically. Click "Next" from the main interface.

If your device can't be detected, please follow below steps to put your device into "Recovery Mode" or "DFU Mode" to get it detected.

Guide on how to get into "DFU Mode":

Step 3: Download Firmware Package

Now you’ll be asked to download the latest firmware package. Choose a save path and click "Download" to proceed.

• Note: Please make sure that your computer has at least 7G space to download the firmware package.

Step 4: Start Unlocking iPhone Locked Scree

When the firmware is downloaded to computer, please click "Start Remove" to start removing iPhone passcode.

The whole process will take several minutes. Please keep the device connected during the process of password removing.

Step 5: Reset Passcode

After successfully removing the iPhone passcode, you can reset the passcode, Touch ID, and Face ID settings on your iPhone. Also, you can restore your iPhone from a previous iTunes or iCloud backup.

Part 2. Remove Apple ID without Password

Step 1: Launch UltFone iOS Screen Unlock

Download UltFone iOS Screen Unlock on your PC or Mac, then open the program to start. You will see the following interface, choose the function "Unlock Apple ID".

Connect your iOS device to the computer. UltFone iOS Screen Unlock will remind you to unlock the screen first, and tap the "Trust" on your device.

Step 2. Remove Apple ID

Click "Next" button to remove the Apple ID and iCloud account presently associated to your iPhone, iPad or iPod touch.

• Scenario 1: If Find My iPhone is off (All iOS versions are supported
• Scenario 2: If Find My iPhone is on and iOS version is below iOS 11.4
• Scenario 3: If Find My iPhone is on and iOS version is iOS 11.4 or later

Scenario 1: If Find My iPhone is off (All iOS versions are supported)

UltFone iOS Screen Unlock will unlock your Apple ID immediately after it is detected and your data will not be lost. (All devices are supported)

The whole process will take a few seconds till the following interface appears.

Scenario 2: If Find My iPhone is on and iOS version is below iOS 11.4

In such situation, you should reset all settings on your iOS device first. Here is how to do: go to "Settings > General > Reset All Settings". After you reset all settings, your device will automatically restart. And UltFone iOS Screen Unlock will start removing your Apple ID or iCloud account immediately.

When the Apple ID unlocking process is complete, you can login into a different Apple ID or create a new account.

Scenario 3: If Find My iPhone is on and iOS version is iOS 11.4 or later

To remove Apple ID from the device running iOS 11.4 or later, you need to make sure that you have set up the screen lock passcode and enabled the Two-Factor Authentication. Otherwise, you will be prompted that the device is not supported.

• Step 1. Setup Screen Lock Passcode on iOS device
• Step 2. Turn on Two-Factor Authentication
• Step 3. Download The Firmware Package
• Step 4. Start to Unlock Apple ID
• Step 5. Activate Your Device

Step 1. Setup Screen Lock Passcode on iOS device

To set up a passcode on your iPhone, go to Settings > Face ID & Passcode/Touch ID & Passcode/Passcode, and Tap ‘Turn Passcode On’. Then, click the ’Yes’ button on the UltFone iOS Screen Unlock.

Step 2. Turn on Two-Factor Authentication

Next, confirm to tap "Yes" button on the interface if you have enabled Two-Factor Authentication already.

Step 3. Download The Firmware Package

The software will automatically identify your device’s iOS version and give the appropriate firmware package. By pressing the button, the firmware can be downloaded.

To download and check the firmware package, wait a short while.

Step 4. Start to Unlock Apple ID

To delete Apple ID, click "Start Unlock" after the download is finished. Please don’t unplug your device at any point during the procedure.

Your smartphone will instantly enter recovery mode, and the screen will show a progress meter.

Step 5. Activate Your Device

After successfully erasing the Apple ID, your device will restart. When the Activation lock screen opens, click "Unlock with Password," then choose "Use Device Passcode" and input your screen passcode.

Done! Your iOS device’s Apple ID has been successfully deleted!

Part 3. Bypass MDM Lock Screen

Step 1: Launch UltFone iOS Screen Unlock

When the download is complete, launch this program on your computer and click to select the "Bypass MDM" mode.

Step 2: Connect Your iDevice to Computer

Connect your iPhone/iPad/iPod Touch to your computer using a USB cable.

Once the connection is successful, click the "Start” button to proceed. (Find My iPhone needs to be turned off before the bypassing process.)

Step 3: Bypass MDM

Now, it will start bypassing the Remote Management lock. Please keep your device connected during the process.

In just a few seconds,the MDM lock screen on your device will be removed successfully.

• Note:
• The Mobile Device Management will appear again after factory restore or software update before signing out of Apple ID. You can use the UltFone iOS Screen Unlock to bypass the MDM lock again before the license expires.

Part 4. Remove Screen Time Passcode

Step 1: Download and Launch UltFone iOS Screen Unlock

First, download and install UltFone iOS Screen Unlock on your computer. Launch the program and select Remove Screen Time Passcode at the main interface.

Step 2: Connect Your Device

Connect your iPhone/iPad/iPod to the computer with a USB cable. Please make sure that your device has been activated.

If you have not trusted the computer yet, please unlock your device and tap on Trust on the pop-up message.

After successfully connecting your device, click on Start Remove to proceed.

Step 3: Turn off Find My iPhone

You should turn off Find my iPhone in order to erase the screen time passcode. Therefore, if you have enabled Find My iPhone, please follow the on-screen instructions to disable it.

Step 4: Remove Screen Time Passcode

Once you have turned off Find My iPhone, the program will start removing the screen time passcode immediately, please wait for a few seconds.

The screen time passcode has now been successfully eliminated without any data loss. Your device will restart after the screen time passcode has been successfully erased. Please choose Don’t Transfer Apps & Data during device setup to prevent data loss. Selecting Set Up Later in the Settings window when configuring Screen Time.