How to Address iPhone 16e Won’t Turn On Malfunctions

Part 1. Why is My iPhone 16e Won’t Turn On

If your iPhone 16e won’t turn on, don’t get worried. It affects many people and there are several causes. Let us discuss them one by one:

• 1.Dead Battery - It may sound simple, but your iPhone's battery might run out of charge totally. Charge it at least 30 minutes before you try to turn it on.
• 2.Faulty Charger or Cable - Charging troubles are not always caused by the phone. If your charger or cord is damaged, the device will not charge properly.
• 3.Software Crash - Your iPhone may freeze or crash due to a system error, which make it not switch on.
• 4.Hardware Damage - Internal parts of your iPhone may be harmed if it was dropped, damp, or involved in any other incident. In this case, troubleshooting might not help and you may need to take it to a repair shop or Apple Support for a checkup.

Part 2. How to Resolve an iPhone 16e Not Turning On

Solution 1: Verify Charger Power Output

If your iPhone 16e won't start, it can be due to charger. Lower-power, older chargers (like 5W adapters) are not able to supply power high enough to restore a flat battery.

How to Fix It:

• 1.Check Your Charger – Replace your old or third-party charger with a 20W or higher Apple-authorized charger.
• 2.Use the Right Cable – Ensure you’re using a USB-C to Lightning or USB-C cable, depending on what was included with your iPhone.

• 3.Plug It In Properly – Connect your iPhone to a power source and wait for 15–30 minutes. Avoid unplugging too soon, as deeply drained batteries take time to respond.
• 4.Check for Charging Signs – Check the charging icon on screen. If not visible after 30 minutes, try another power outlet, cable or adapter.

Solution 2: Adjust Device Temperature

Severe temperatures may prevent your iPhone 16e from booting up. If your phone is too cold or too warm, its protection systems might turn it off until the situation gets better.

Steps to Fix It:

If your iPhone is too hot:

• 1.If the screen is not responding, leave it to cool down.
• 2.Put your iPhone in cooler, ventilated place for 20–30 minutes.
• 3.Don't put your phone in a refrigerator or freezer as this can internally damage your device.
• 4.Once it has cooled, try restarting or charging it.

Solution 3: Force Restart the iPhone

If your iPhone 16e is unresponsive and won't switch on, it could be due to a software crash. A forced restart can help it get back to life.

Steps for Fixing It:

• 1.Press and then release the Volume Up button.
• 2.Push and release the Volume Down button.
• 3.Press and hold the Side (Power) button until the Apple logo appears on the screen.

A force restart helps to reset unresponsive iPhones by removing minor software issues. It does not destroy any data, but it can resolve simple crashes that prevent the phone from booting up.

Solution 4: Enter Recovery Mode

Entering Recovery Mode can help restore the device and get it running again. Recovery Mode allows your iPhone to connect to a computer and restore system software. This can fix serious software issues or update failures that prevent the phone from booting up.

Steps to Fix It:

• ①Connect your iPhone to a computer – Use a USB-C to Lightning or USB-C cable to plug your iPhone into a Mac or PC.
• ②Open Finder (Mac) or iTunes (Windows) – Ensure you have the latest version of iTunes if you're using a PC.
• ③Force Restart Your iPhone:
  • 1.Press and release the Volume Up button.
  • 2.Press and release the Volume Down button.
  • 3.Press and hold the Side (Power) button until you see the Recovery Mode screen (a cable pointing to a computer).
  
• ④Choose an Action:
  • 1.Update: If available, select "Update" to reinstall iOS without erasing data.
  • 2.Restore: If "Update" doesn’t work, choose "Restore" (this erases all data).
• ⑤Wait for the Process to Finish – Keep your iPhone connected while it updates or restores. After completion, restart your device.

Solution 5: Attempt DFU Mode

If Recovery Mode does not resolve your iPhone 16e issue, you may need to use DFU mode. This is the most advanced troubleshooting step, because it allows you to reinstall the firmware and resolve serious system issues.

How to Fix It:

• ①Connect iPhone to a computer using a USB-C to Lightning/USB-C cable.
• ②Open Finder (Mac) or iTunes (Windows) with the latest version installed.
• ③Enter DFU Mode:
  • 1.Press & release Volume Up.
  • 2.Press & release Volume Down.
  • 3.Hold Side (Power) button until the screen goes black.
  • 4.Hold Volume Down while still holding Side button.
  • 5.After 5 sec, release Side button but keep holding Volume Down for 10 more sec.
  • 6.Screen stays black, and Finder/iTunes detects DFU mode.
  
• ④Restore iPhone by following on-screen instructions.
• ⑤Wait for the process to finish, then restart your iPhone.

Part 3. Resolve iPhone 16e Not Turning On Without Losing Data [Most Effective Method]

If your iPhone won't turn on or is frozen or iphone won't turn off and simple solutions like charging or force restarting haven't worked, it could be a software issue. System crashes, failed iOS updates, and internal problems can sometimes render your iPhone totally unresponsive. In such situations, common troubleshooting methods may be ineffective to restore your iPhone.

Fortunately, UltFone iOS System Repair offers a professional yet user-friendly solution for resolving iOS system faults without deleting your files. It can fix black screens, boot loops, and problems where your iPhone 16e won't turn on due to system errors.

Feature of UltFone iOS System Repair:

• Easily Fix iPhone 16e That Won’t Turn On: Repair unresponsive devices without complex troubleshooting.
• No Data Loss: Resolve system issues while keeping all your files intact.
• Enter & Exit Recovery Mode: One-click solution to fix stuck recovery mode on iPhone 16e/iPhone SE 4.
• Supports all iOS versions, including the latest iPhone 16e upgrades.
• User-Friendly Interface: No technical experience necessary.

To resolve “iPhone 16 Pro not turning on” issues using UltFone iOS System Repair, follow these steps:

• Step 1 Download and install the software into your PC or Mac. Launch the application and connect your iPhone to the PC. Click "Start" to start the iOS system repair process.

• Step 2Select "Standard Repair" to proceed without losing data.

• Step 3 Follow the on-screen instructions, then click "Start to Repair" to begin repairing your device.

• Step 4 Once the iOS system recovery is done, your device will automatically restart and return to normal.

Part 4. FAQs About Resolve an iPhone Issues

Q1: Why does my iPhone have a black screen and won't turn on?

A: Your iPhone may have a drained battery, software glitches or hardware damage. You should try charging it, force restarting or using system repair software.

Q2: What is the black screen of death?

A: The black screen of death refers to an unresponsive iPhone screen caused by system crashes, failed updates or hardware issues. A force restart or repair tool can help fix it.

Q3: How to turn off iPhone if the screen is black?

A: Perform a force restart: Press and release the Volume Up, then Volume Down then hold the Side/Power button until the Apple logo appears.

Q4: Why is my iPhone not turning on after charging?

A: It could be due to a faulty charging cable, deep battery discharge or software issues. Try a different charger, force restart or use system recovery software.

Conclusion

If your iPhone 16e won't turn on, the solutions above should help bring your device back to life. However if the issue persists due to deeper system glitches, UltFone iOS System Repair is a reliable tool to fix it. This software effectively resolves iOS problems, ensuring your device functions normally again.